Oral Cube 7 Panel Saliva Drug Alcohol Test
Box of 25
One-Step Drug and Alcohol Test - Oral Fluid Drug Screen Device.
Features:
-
Oral Cube is Easy and Convenient
-
Oral Cube Eliminates Controlled collection Site
-
Test can be performed Anytime Anywhere
-
Oral Cube Eliminates need for Same Sex Collectors
-
No more Collection Fees
Oral Cube is a revolutionary one step saliva drug and alcohol test that is designed to detect recent drug usage and can detect configurations of 7 or 11 drugs of abuse including an alcohol test strip, which tests for the presence of alcohol in parameters of 0.02 - 0.30% BAC. Oral fluid drug screening has certain advantages over the screening of other human fluids such as urine and blood. Saliva (Oral fluid) is normally an easy sample to collect and is much less likely to be adulterated, unlike urine. With oral fluid tests the drugs may be identified immediately after being used.
Oral Cube is a newly designed on-site oral fluid saliva drug and alcohol test that makes the test procedure simple and easy to perform. In the past saliva drug testing products have been hard to use and confusing. Oral Cube makes it easy, the swab slides in and out of the test kit: out for application and back in for test results. Make sure that the swab has enough saliva to initiate the test, as it must be completely saturated with the saliva specimen. The Oral Cube test kit will then do the work getting the saliva oral specimen from the swab to the detection chamber and results will follow.
Oral Cube is a brand new product, as a 7 panel (6 drug plus alcohol) test device. Oral Cube with its new design, will give you a more dynamic and effective testing experience, a powerful microscope to search and identify the presence of 6 drugs plus alcohol (from 0.02 - 0.30% BAC) simultaneously, in a time period of 10 minutes.
The Oral Cube product is intended for Forensic use only in the U.S. Oral Cube is not intended for home use as a final confirmation. This test device is intended to be used as a preliminary test result and should be confirmed by a SAMSHA certified lab, if you are using the product to determine employment eligibility.
Test Procedure:
Step 1
Remove the collection stick and test tube from the sealed pouch. tear of the package of the collection stick.
Step 2
Insert the sponge end of the collection stick into the mouth and soak the sponge into saliva for three minutes. (Note: Time should be longer for people of little saliva. If the amount of saliva pressed into the test tube is not adquate for testing, collect more with another collection stick and express the saliva into tube again).
Step 3
Hold the test tube vertically and place the collection stick with saturated sponge into the test tube. Make sure to fill the groove of collection stick onto the guide rail of test tube and press the collection stick to full extent.
Step 4
Press down the lid to close the test tube. Keep the test tube vertically until you begin to read the results.
Step 5
Read the results at 10 minutes. (If there is a label over reading window, peel off the label to read results). Do not read results after 1 hour.
